CDM-625A Advanced Satellite Modem
Ethernet-based Remote Product Management
7.5.4.4.4.7
Status | Traffic Statistics | PTP
Sect. K.7.3 PTP (Precision Time Protocol) (Appendix K. ETHERNET NETWORK
CONFIGURATION)
Use this page to obtain data intended to troubleshoot PTP (Precision Time Protocol) operational
issues.
PTP Status
Click [Refresh] to update this section with its most recently accumulated statistics.
These status parameters are read-only and cannot be changed. Note the following:
Row Title
(from top)
PTP Offset
LAN State
Figure 7-44. Status | Traffic Statistics | PTP page
Description
Displays the offset, in seconds, between the modem's slave clock and its master.
Displays the state for the clock on the LAN side:
The State displays as "Slave" when Grandmaster is set to LAN port using the
•
'Configuration | ANT | PTP' page (see Sect. 7.5.4.3.11.1).
The State displays as "Master" when Grandmaster is set to WAN port using the
•
'Configuration | ANT | PTP' page (see Sect. 7.5.4.3.11.1).
7–75
MN-CDM625A
Revision 4
Need help?
Do you have a question about the CDM-625A and is the answer not in the manual?
Questions and answers