CDM-625A Advanced Satellite Modem
Ethernet-based Remote Product Management
7.5.4.4.2 Status | Modem Logs
Chapter 6. FRONT PANEL OPERATION
Click the Base Modem tab, or – when you install and enable the optional IP Packet Processor
card – the Packet Processor tab to continue.
7.5.4.4.2.1
Status | Modem Logs | Base Modem
Use this page to control how the fault, statistics, and alarm masking parameters are processed
by the unit.
Events Log
When events are present, information is viewable as per this example:
•
Read Next Five Events – Click to buffer the next group of five stored events into the
scrollable events window.
Figure 7-35. Status | Modem Logs | Base Modem page
7–65
MN-CDM625A
Revision 4
Need help?
Do you have a question about the CDM-625A and is the answer not in the manual?
Questions and answers