Home > Administration > Host Access List - Comtech EF Data CDM-625A Installation And Operation Manual

CDM-625A Advanced Satellite Modem
Telnet Command Line Interface (CLI) Operation
9.3.2.1 Home > Administration > Host Access List
Open the scrollable Host Access List page from the Administration submenu. This page contains
the following options:
Hot
Dialog Window
Key
A Access List Enforcement
B Access IP 1 Access IP List Entry Enable
E Access IP 2 Access IP List Entry Enable
H Access IP 3 Access IP List Entry Enable
K Access IP 4 Access IP List Entry Enable
C Access IP 1 Access IP Address
F
Access IP 2 Access IP Address
I
Access IP 3 Access IP Address
L
Access IP 4 Access IP Address
D Access IP 1 Access Network Prefix
G Access IP 2 Access Network Prefix
J Access IP 3 Access Network Prefix
M Access IP 4 Access Network Prefix
Press a hot key to open a dialog window. Otherwise, press [ESC] to return to the Administration
submenu.
Function / Option Entry
Use ↑↓ arrow keys to select Enabled or Disabled
Typical for each entry – Use ↑↓ arrow keys to set each list as
Enabled or Disabled
Typical for each entry – Enter each IP Address in the form
XXX.XXX.XXX.XXX
Be sure to include your system's IP Address in
this list
Typical for each entry – Enter a value as follows:
Range 1 – Enter a value of 0
•
Range 2 – Enter a value from 8 to 32
•
If you enter an invalid value, the CLI displays
error message "Number is out of range"
9–13
MN-CDM625A
Revision 4