Configuration | Lan; Configuration | Lan | Ip - Comtech EF Data CDM-625A Installation And Operation Manual

CDM-625A Advanced Satellite Modem
Ethernet-based Remote Product Management
7.5.4.3.2 Configuration | LAN Pages
Click the IP tab, the ARP tab (only after you install and enable the optional IP Packet Processor
card), or the Port Monitoring tab to continue.
7.5.4.3.2.1

Configuration | LAN | IP

Network Configuration
•
Ping Reply – Use the drop-down list to select Ping Reply as Disabled or Enabled. When
Enabled, the modem responds to ICMP ping requests.
•
MAC Address – This parameter is read-only and cannot be changed.
• WAN Buffer Length – Enter a value between 20ms and 400ms, in 20ms increments.
•
L2 QoS (Layer 2 QoS) – Use the drop-down list to select this feature as Off, VLAN only, Port
only, or VLAN & Port.
Figure 7-13. Configuration | LAN | IP page
7–25
MN-CDM625A
Revision 4