Comtech EF Data CDM-625A Installation And Operation Manual page 110

CDM-625A Advanced Satellite Modem
Updating Firmware
C. Use the 'Run' and 'Browse' windows to create and rename the temporary folder.
• Select [Start] on the Windows taskbar, and then click the Run... icon. This opens the
'Run' window.
•
Click [Browse] in the 'Run' window. This opens the 'Browse' window.
• Click the Create New Folder icon in the 'Browse' window. This creates the new
folder.
•
Right-click the "New Folder" folder name, and then rename this folder to "temp" or
some other convenient, unused name:
D. Use Windows Command-line to create the temporary folder.
•
First, click [Start] on the Windows taskbar, and then click the Run... icon (or,
depending on Windows OS versions prior to Windows 95, click the MS-DOS Prompt
icon from the Main Menu).
•
Next, open a Command-line window...
o For Windows 95 or Windows 98, type "command" (or, for any Windows OS
o Alternately, from [Start], select All Programs > Accessories > Command
o Finally, from the Command-line prompt (c:\>), type "mkdir temp" or "md temp"
There should now be a "temp" folder created and available for placement of the firmware file
download.
versions later than Windows 98, type "cmd" or "command"):
Prompt.
(mkdir and md stand for make directory), and then click [OK]:
4–6
MN-CDM625A
Revision 4