Standard Data Interfaces; Optional Hardware And Accessories - Comtech EF Data CDM-625A Installation And Operation Manual

CDM-625A Advanced Satellite Modem
Introduction
Internet from Comtech EF Data's Web site, via e-mail, or on CD, and can be transferred from an
external client PC once connectivity has been established with the modem.
1.3.5

Standard Data Interfaces

Chapter 3. REAR PANEL CONNECTORS
The CDM-625A includes a universal data interface that eliminates the need to exchange
interface cards for different applications. The interfaces offered, as standard, include:
• RS-422 (EIA530) DCE (at rates up to 14 Mbps)
•
X.21 DTE and DCE (at rates up to 2.048 Mbps)
•
V.35 DCE (at rates up to 14 Mbps)
• G.703 E1, balanced and unbalanced
• G.703 T1, balanced
•
G.703 E2, unbalanced
•
G.703 T2, balanced and unbalanced
• Quad E1 Drop and Insert (QDI) – up to 4 balanced E1ports
•
Serial LVDS (at rates up to 25 Mbps)
•
HSSI (at rates up to 25 Mbps)
• ASI
•
Four-port Ethernet 10/100 BaseT switch for IP bridging and routing
•
Dual Audio, 600Ω (produces a single 64 kbps data stream with either IBS or EDMAC framing)
1.3.6

Optional Hardware and Accessories

Table 1-1 identifies the available hardware options and accessories that can be factory-installed
at the time of ordering or user-installed in the field. Refer to the specified manual section for
further information or details. Contact Comtech EF Data Product Support to purchase any of
these products.
PINOUTS
AND
1–5
MN-CDM625A
Revision 4