Removing A Hot-Plug Psu - Fujitsu PRIMERGY RX2530 M6 Upgrade And Maintenance Manual

Ensure that the PSU engages correctly in the bay and is locked in
position.
Figure 34: Installing the cable clamp
▶ Only for AC PSU: push the cable clamp into the corresponding hole until it
clicks in.
Concluding steps
▶
"Connecting the power cord" on page
6.4

Removing a hot-plug PSU

Customer Replaceable
Unit (CRU)
Tools: Phillips PH1 / (+) No. 1 screw driver (for DC PSU -48 V)
The procedure of removing an AC PSU or a DC PSU differs only in
disconnecting/connecting the power cord.
RX2530 M6
62.
Upgrade and Maintenance Manual
Power supply unit (PSU)
Hardware: 5 minutes
111