Managing Https - 3Com 3CRWX120695A, 3CRWX440095A Configuration Manual

Managing HTTPS

3 admin sessions
To clear all Telnet server sessions, type the following command:
WX1200# clear sessions telnet
This will terminate manager sessions,
do you wish to continue? (y|n) [n]y
Cleared telnet session on tty2
(To manage Telnet client sessions, see "Logging In to a Remote Device"
on page 100.)
Enabling HTTPS
HTTPS is disabled by default. To enable HTTPS, use the following
command:
set ip https server {enable | disable}
CAUTION: If you disable the HTTPS server, Web Manager access to the
switch is also disabled.
Displaying HTTPS Information
To display HTTPS service information, use the following command:
display ip https
To display information for a WX switch's HTTPS server, type the following
command:
WX1200> display ip https
HTTPS is enabled
HTTPS is set to use port 443
Last 10 Connections:
IP Address Last Connected
------------ ----------------------- ------------
10.10.10.56 2003/05/09 15:51:26 pst
The command lists the TCP port number on which the switch listens for
HTTPS connections. The command also lists the last 10 devices to
establish HTTPS connections with the switch and when the connections
were established.
Managing the Management Services
Time Ago (s)
89
349