Table of Contents
Advertisement
The RADIUS attributes supported by MSS are described in "Supported
RADIUS Attributes" on page 423.
MSS provides the following VSAs, which you can assign to users
configured in the local database or on a RADIUS server:
Encryption-Type — Specifies the type of encryption required for
access by the client. Clients who attempt to use an unauthorized
encryption method are rejected.
End-Date — Date and time after which the user is no longer allowed
to be on the network.
Mobility-Profile — Controls the WX switch ports a user can access.
For wireless users, an MSS Mobility Profile specifies the MAP access
points through which the user can access the network. For wired
authentication users, the Mobility Profile specifies the wired
authentication ports through which the user can access the network.
SSID — SSID the user is allowed to access after authentication.
Start-Date — Date and time at which the user becomes eligible to
access the network. MSS does not authenticate the user unless the
attempt to access the network occurs at or after the specified date
and time, but before the end-date (if specified).
Time-of-Day — Day(s) and time(s) during which the user is permitted
to log into the network.
URL — URL to which the user is redirected after successful WebAAA.
VLAN-Name — VLAN to place the user on.
You also can assign the following RADIUS attributes to users configured
in the local database.
Filter-Id — Security ACL that permits or denies traffic received by
(input) or sent by (output) the user.
Service-Type — Type of access the user is requesting, which can be
network access, administrative access to the enabled (configuration)
mode of the MSS CLI, or administrative access to the nonenabled
mode of the CLI
Session-Timeout — Maximum number of seconds allowed for the
user's session.
About AAA for Network Users
283
Advertisement
Table of Contents
