Table of Contents
Advertisement
Overriding
AAA-Assigned VLANs
WX1200# set location policy permit vlan bldgb-eng if vlan eq bldga-prof-*
WX1200# set location policy permit vlan bldgb-eng if vlan eq *-techcomm
The following example shows how to change the VLAN access of wireless
users in an organization housed in multiple buildings.
Suppose the wireless users on the faculty of a college English department
have offices in building A and are authorized to use that building's
bldga-prof- VLANs. These users also teach classes in building B. Because
you do not want to tunnel these users back to building A from building B
when they use their wireless laptops in class, you configure the location
policy on the WX switch to redirect them to the bldgb-eng VLAN.
You also want to allow writing instructors normally authorized to use any
-techcomm VLAN in the college to access the network through the
bldgb-eng VLAN when they are in building B.
1 Redirect bldga-prof- VLAN users to the VLAN bldgb-eng:
2 Allow writing instructors from -techcomm VLANs to use the bldgb-eng
VLAN:
3 Display the configuration:
WX1200# display location policy
Id Clauses
-----------------------------------------------------
1) permit vlan bldgb-teach if vlan eq bldga-prof-*
2) permit vlan bldgb-eng if vlan eq *-techcomm
4 Save the configuration:
WX1200# save config
success: configuration saved.
Network User Configuration Scenarios
341
Advertisement
Table of Contents
