310
C
13: C
HAPTER
ONFIGURING
WX1200# copy tftp://10.1.1.1/mycorp-login.html mycorp-webaaa/mycorp-login.html
success: received 637 bytes in 0.253 seconds [ 2517 bytes/sec]
WX1200# copy tftp://10.1.1.1/mycorp-logo.jpg mycorp-webaaa/mycorp-logo.jpg
success: received 1202 bytes in 0.402 seconds [ 2112 bytes/sec]
WX1200# dir mycorp-webaaa
===============================================================================
file:
Filename
file:mycorp-login.html
15:42:26
file:mycorp-logo.jpg
15:57:11
Total:
Using Dynamic Fields
in WebAAA Redirect
URLs
AAA
N
FOR
ETWORK
1839 bytes used, 206577 Kbytes free
8 Configure an unencrypted SSID:
WX1200# set service-profile mycorp ssid mycorpsurf
ssid-type clear
success: change accepted.
9 Configure the unencrypted SSID to use the custom page:
WX1200# set service-profile mycorp web-aaa-form
mycorp-webaaa/mycorp-login.html
success: change accepted.
10 Configure a WebAAA rule for the SSID:
WX1200# set authentication web ssid mycorpsurf ** local
success: change accepted.
11 Configure web users, if not already configured:
WX1200# set user alice password alicepword
success: change accepted.
WX1200# set user bob password bobpword
success: change accepted.
You can include variables in the URL to which a WebAAA client is
redirected after authentication and authorization. Table 30 lists the
variables you can include in a redirect URL.
Table 30 Variables for Redirect URLs
Variable
$u
$v
U
SERS
Size
637 bytes
1202 bytes
Description
Username of the WebAAA user
VLAN to which the user was assigned during
authorization
Created
Aug 12 2004,
Aug 12 2004,