274
C
12: M
HAPTER
ANAGING
K
C
EYS AND
ERTIFICATES
6 Open the signed certificate file with a text editor. Copy the entire file
from the first hyphen to the last.
7 To install the administrative certificate on the WX switch, type the
following command to display a prompt:
You must paste the entire block, from the beginning
-----BEGIN CERTIFICATE REQUEST----- to the end
-----END CERTIFICATE REQUEST-----.
# crypto certificate admin
Enter PEM-encoded certificate
8 Paste the signed certificate text block into the WX switch's CLI, below the
prompt.
9 Display information about the certificate, to verify it:
You must paste the entire block, from the beginning
-----BEGIN CERTIFICATE REQUEST----- to the end
-----END CERTIFICATE REQUEST-----.
# display crypto certificate admin
10 Repeat step 3 through step 9 to obtain and install EAP (802.1X) and
Web AAA certificates.
11 Obtain the CA's own certificate.
12 To install the CA's certificate on the WX switch and help authenticate the
switch's Admin certificate, type the following command to display a
prompt:
You must paste the entire block, from the beginning
-----BEGIN CERTIFICATE REQUEST----- to the end
-----END CERTIFICATE REQUEST-----.
# crypto ca-certificate admin
Enter PEM-encoded certificate
13 Paste the CA's signed certificate under the prompt.
14 Display information about the CA's certificate, to verify it:
You must paste the entire block, from the beginning
-----BEGIN CERTIFICATE REQUEST----- to the end
-----END CERTIFICATE REQUEST-----.
# display crypto ca-certificate admin