Displaying The Stp Port Cost On A Vlan Basis - 3Com 3CRWX120695A, 3CRWX440095A Configuration Manual

WX1200# display spantree vlan mauve
VLAN 3
Spanning tree mode
Spanning tree type
Spanning tree enabled
Designated Root
Designated Root Priority
Designated Root Path Cost
Designated Root Port
Root Max Age
Bridge ID MAC ADDR
Bridge ID Priority
Bridge Max Age 20 sec
Port
------------------------------------------------------------------------------
1
2
3
5
6
Displaying the STP
Port Cost on a VLAN
Basis
port list or a VLAN name or number. For each VLAN, only the ports
contained in the VLAN are listed in the command output.
To list only the ports that are in the active (forwarding) state, enter the
active option.
To display STP information for VLAN mauve, type the following
command:
PVST+
IEEE
00-02-4a-70-49-f7
32768
19
1
20 sec Hello Time 2 sec
00-0b-0e-02-76-f7
32768
Hello Time 2 sec
Vlan Port-State
1
1
1
1
1
In this example, VLAN mauve contains ports 1 through 3, 5 and 6. Ports 1
and 5 are forwarding traffic. The other ports are blocking traffic.
(For more information about the fields in the output, see the
LAN Switch and Controller Command
To display a brief list of the STP port cost for a port in each of its VLANs,
use the following command:
display spantree portvlancost port-list
Displaying Spanning Tree Information
Forward Delay 15 sec
Forward Delay 15 sec
Cost
Forwarding
Blocking
Blocking
Forwarding
Blocking
Prio Portfast
19 128 Disabled
19 128 Disabled
19 128 Disabled
19 128 Disabled
19 128 Disabled
Reference.)
215
Wireless