3Com 3CRWX120695A, 3CRWX440095A Configuration Manual page 392

392 C 18: M
HAPTER ANAGING
WX1200# copy tftp://10.1.1.107/WXB03001.Rel boot1:WXB03001.Rel
................................................................................
............................success: received 9163214 bytes in 105.939 seconds
[ 86495 bytes/sec]
S F
YSTEM ILES
You can copy a file from a WX switch to a TFTP server or from a TFTP
server to a WX switch, but you cannot use MSS to copy a file directly
from one TFTP server to another.
To copy the file floor2wx from nonvolatile storage to a TFTP server, type
the following command:
WX1200# copy floor2wx tftp://10.1.1.1/floor2wx
success: sent 365 bytes in 0.401 seconds [ 910 bytes/sec]
The above command copies the file to the same filename on the TFTP
server. To rename the file when copying it, type the following command:
WX1200# copy floor2wx tftp://10.1.1.1/floor2wx-backup
success: sent 365 bytes in 0.401 seconds [ 910 bytes/sec]
To copy a file named newconfig from a TFTP server to nonvolatile
storage, type the following command:
WX1200# copy tftp://10.1.1.1/newconfig newconfig
success: received 637 bytes in 0.253 seconds [ 2517
bytes/sec]
The above command copies the file to the same filename. To rename the
file when copying it, type the following command:
WX1200# copy tftp://10.1.1.1/newconfig wxconfig
success: received 637 bytes in 0.253 seconds [ 2517
bytes/sec]
To copy system image WXB03001.Rel from a TFTP server to boot
partition 1 in nonvolatile storage, type the following command:
To rename test-config to new-config, you can copy it from one name to
the other in the same location, and then delete test-config. Type the
following commands:
WX1200# copy test-config new-config
WX1200# delete test-config
success: file deleted.