Displaying The Mobility Domain Configuration; Clearing A Mobility Domain From A Wx Switch; Clearing A Mobility Domain Member From A Seed - 3Com 3CRWX120695A, 3CRWX440095A Configuration Manual

110 C 5: C
HAPTER ONFIGURING AND
Displaying the
Mobility Domain
Configuration
Clearing a Mobility
Domain from a WX
Switch
Clearing a Mobility
Domain Member
from a Seed
M M
ANAGING OBILITY
WX1200# display mobility-domain status
Mobility Domain name:
Member
---------------
192.168.12.7
192.168.14.6
192.168.15.5
To view the configuration of the Mobility Domain, use the display
mobility-domain config command on either the seed or a nonseed
member.
To view Mobility Domain configuration on the seed:
WX1200# display mobility-domain config
This WX is the seed for domain Pleasanton.
192.168.12.7 is a member
192.168.15.5 is a member
To view Mobility Domain configuration on a member:
WX1200# display mobility-domain config
This WX is a member, with seed 192.168.14.6
You can clear all Mobility Domain configuration from a WX switch,
regardless of whether the WX switch is a seed or a member of a Mobility
Domain.
You might want to clear the Mobility Domain to change a WX switch
from one Mobility Domain to another, or to remove a WX switch from
the Mobility Domain. To clear the Mobility Domain, type the following
command:
WX1200# clear mobility-domain
success: change accepted
This command has no effect if the WX switch is not configured as part of
a Mobility Domain.
You can remove individual members from the Mobility Domain on the
seed WX switch. To remove a specific member of the Mobility Domain,
type the following command:
clear mobility-domain member ip-addr
D R
OMAIN OAMING
Pleasanton
State
-------------
STATE_UP
STATE_UP
STATE_UP
Status
--------------
MEMBER
SEED
MEMBER