3Com 3CRWX120695A, 3CRWX440095A Configuration Manual page 288

288 C 13: C
HAPTER ONFIGURING
WX1200# set radius server server-1 address 192.168.253.1 key chey3nn3
WX1200# set radius server server-2 address 192.168.253.2 key chey3nn3
WX1200# set server group server-group-1 members server-1 server-2
WX1200# set authentication dot1x ssid mycorp *@example.com pass-through
server-group-1 local
set authentication dot1x ssid mycorp *@example.com pass-through server-group-1
AAA N
FOR ETWORK
authentication by a RADIUS server group as the first method for these
users and configure local authentication last, in case the RADIUS servers
are unavailable. (See Figure 11.)
1 To configure server-1 and server-2 at IP addresses 192.168.253.1 and
192.168.253.2 with the password chey3nn3, the administrator enters
the following commands:
To configure server-1 and server-2 into server-group-1, the administrator
enters the following command:
2 To enable pass-through plus local authentication for all users of SSID
mycorp at @example.com, the administrator enters the following
command.
Figure 11 shows the results of this combination of methods.
Figure 11 Remote Pass-Through or Local Authentication
5
pass fail
RADIUS
Server-1
1
Server-group-1
U
SERS
RADIUS
Server-2
2
1
WX switch
local database
4
3
local