Copying A File - 3Com 3CRWX120695A, 3CRWX440095A Configuration Manual

Copying a File

You can perform the following copy operations:
To copy a file, use the following command.
copy source-url destination-url
A URL can be one of the following:
The filename and file:filename URLs are equivalent. You can use either
URL to refer to a file in a WX switch's nonvolatile memory.
The tftp://ip-addr/filename URL refers to a file on a TFTP server. If DNS is
configured on the WX switch, you can specify a TFTP server's hostname
as an alternative to specifying the IP address.
The tmp:filename URL refers to a file in temporary storage. You can copy
a file out of temporary storage but you cannot copy a file into temporary
storage.
The subdirname/ option specifies a subdirectory.
If you are copying a system image file into nonvolatile storage, the
destination-url must include the boot partition name. You can specify
one of the following:
You must specify the boot partition that was not used to load the
currently running image.
Copy a file from a TFTP server to nonvolatile storage.
Copy a file from nonvolatile storage or temporary storage to a TFTP
server.
Copy a file from one area in nonvolatile storage to another.
Copy a file to a new filename in nonvolatile storage.
[subdirname/]filename
file:[subdirname/]filename
tftp://ip-addr/[subdirname/]filename
tmp:filename
boot0:/filename
boot1:/filename
Working with Files 391