Table of Contents
Advertisement
150
C
6: C
MAP A
P
HAPTER
ONFIGURING
CCESS
OINTS
set radio-profile name frag-threshold threshold
The threshold can be a value from 256 through 2346. The default is
2346.
To change the fragmentation threshold for radio profile rp1 to 1500
bytes, type the following command:
WX1200# set radio-profile rp1 frag-threshold 1500
success: change accepted.
Changing the Short Retry Threshold The short retry threshold
specifies the number of times a radio can send a short unicast frame
without receiving an acknowledgment for the frame. A short unicast
frame is a frame that is shorter than the RTS threshold.
To change the short retry threshold, use the following command:
set radio-profile name short-retry threshold
The threshold can be a value from 1 through 15. The default is 5.
To change the short retry threshold for radio profile rp1 to 3, type the
following command:
WX1200# set radio-profile rp1 short-retry 3
success: change accepted.
Changing the Long Retry Threshold The long retry threshold
specifies the number of times a radio can send a long unicast frame
without receiving an acknowledgment for the frame. A long unicast
frame is a frame that is equal to or longer than the RTS threshold.
To change the long retry threshold, use the following command:
set radio-profile name long-retry threshold
The threshold can be a value from 1 through 15. The default is 5.
To change the long retry threshold for radio profile rp1 to 8, type the
following command:
WX1200# set radio-profile rp1 long-retry 8
success: change accepted.
Changing the Maximum Receive Threshold The maximum receive
threshold specifies the number of milliseconds a frame received by a radio
Advertisement
Table of Contents
