Configuring Accounting For Wireless Network Users - 3Com 3CRWX120695A, 3CRWX440095A Configuration Manual

Configuring
Accounting for
Wireless Network
Users
Accounting records come in three types: start-stop, stop-only, and
update for network users. The records provide information about
network resource usage.
To set accounting, type the following command:
set accounting {admin | console | dot1x |
mac | web} {ssid ssid-name | wired}
{user-glob | mac-addr-glob} {start-stop
method1 [method2] [method3] [method4]
For example, to store start-stop accounting records at example.com for
802.1X users of SSID mycorp in the local database, type the following
command:
WX1200# set accounting dot1x ssid mycorp *@example.com
start-stop local
success: change accepted.
The accounting records can contain the session information shown in
Table 35.
Table 35 Session Information Shown in Accounting Records
Start Records
Session date and time
Location of authentication (if any):
RADIUS server (1) or local database (2)
ID for related sessions
Username
Session duration
Timestamp
VLAN name
Client's MAC address
MAP port number and radio number
MAP access point's MAC address

Configuring Accounting for Wireless Network Users

Update and Stop Records
Session date and time
Location of authentication (if any):
RADIUS server (1) or local database (2)
ID for related sessions
Username
Session duration
Timestamp
VLAN name
Client's MAC address
MAP port number and radio number
MAP access point's MAC address
Number of octets received by the WX
switch
Number of octets sent by the switch
327
| stop-only}