Table of Contents
Advertisement
330
C
13: C
HAPTER
ONFIGURING
Displaying the AAA
Configuration
WX1200# display aaa
Default Values
authport=1812 acctport=1813 timeout=5 acct-timeout=5
retrans=3 deadtime=0 key=(null) author-pass=(null)
Radius Servers
Server
--------------------------------------------------------------------
rs-3
rs-4
rs-5
Server groups
sg1: rs-3
sg2: rs-4
sg3: rs-5
set authentication admin Jose sg3
set authentication console * none
set authentication mac ssid mycorp * local
set authentication dot1x ssid mycorp Geetha eap-tls
set authentication dot1x ssid mycorp * peap-mschapv2 sg1 sg2 sg3
set accounting dot1x Nin ssid mycorp stop-only sg2
set accounting admin Natasha start-stop local
AAA
N
U
FOR
ETWORK
SERS
Vlan-Name=default
Calling-Station-Id=00-06-25-09-39-5D
Nas-Port-Id=2/1
Called-Station-Id=00-0B-0E-76-56-A0
If you configured accounting records to be sent to a RADIUS server, you
can view the records of user roaming at the RADIUS server. (For more
information on these attributes, see "Supported RADIUS Attributes" on
page 423.)
For information about requesting accounting records from the RADIUS
server, see the documentation for your RADIUS server.
To view the results of the AAA commands you have set and verify their
order, type the display aaa command. The order in which the
commands appear in the output determines the order in which MSS
matches them to users.
(Sometimes the order might not be what you intended. See "Avoiding
AAA Problems in Configuration Order" on page 331.)
For example:
Addr
198.162.1.1
198.168.1.2
198.162.1.3
Ports
T/o Tries Dead State
1821 1813
5
3
1821 1813
77
11
1821 1813
42
23
0
UP
2
UP
0
UP
Advertisement
Table of Contents
