Table of Contents
Advertisement
94
C
4: C
M
IP I
S
HAPTER
ONFIGURING AND
ANAGING
NTERFACES AND
ERVICES
To set the time zone to PST (Pacific Standard Time), type the following
command:
WX1200# set timezone PST -8
Timezone is set to 'PST', offset from UTC is -8:0 hours.
Displaying the Time Zone
To display the time zone, use the following command:
display timezone
For example, to display the time zone, type the following command:
WX1200# display timezone
Timezone set to 'PST', offset from UTC is -8 hours
Clearing the Time Zone
To clear the time zone, use the following command:
clear timezone
Configuring the
The summertime period offsets the system time +1 hour and returns it to
Summertime Period
standard time for daylight savings time or a similar summertime period
that you set.
Configure summertime before you set the time and date. Otherwise,
summertime's adjustment of the time will make the time incorrect, if the
date is within the summertime period.
To configure the summertime period, use the following command:
set summertime summer-name
[start week weekday month hour min
end week weekday month hour min]
The summer-name can be up to 32 alphanumeric characters long, with
no spaces. The start and end dates and times are optional. If you do not
specify a start and end time, MSS implements the time change starting at
2:00 a.m. on the first Sunday in April and ending at 2:00 a.m. on the last
Sunday in October, according to the North American standard.
To set the summertime period to PDT (Pacific Daylight Time) and use the
default start and end dates and times, type the following command:
WX1200# set summertime PDT
success: change accepted.
Advertisement
Table of Contents
