3Com 3CRWX120695A, 3CRWX440095A Configuration Manual page 316

316 C 13: C
HAPTER ONFIGURING
AAA N U
FOR ETWORK SERS
Table 32 Authentication Attributes for Local Users (continued)
Attribute Description
service-type Type of access the user
is requesting.
session-timeout Maximum number of
seconds for the user's
(network access
session.
mode only)
ssid SSID the user is
allowed to access after
(network access
authentication.
mode only)
start-date Date and time at which
the user becomes eligible
to access the network.
MSS does not
authenticate the user
unless the attempt to
access the network occurs
at or after the specified
date and time, but before
the end-date (if specified).
Valid Value(s)
One of the following numbers:
2—Framed; for network user access
6—Administrative; for administrative
access to the WX switch, with
authorization to access the enabled
(configuration) mode. The user must
enter the enable command to access
the enabled mode.
7—NAS-Prompt; for administrative
access to the nonenabled mode only.
In this mode, the enable command is
not available and the user cannot log
in to the enabled mode.
For administrative sessions, the WX
switch will send 7 (NAS-Prompt) unless
the service-type attribute has been
configured for the user.
The RADIUS server can reply with one
of the values listed above.
If the service-type is not set on the
RADIUS server, administrative users
receive NAS-Prompt access, and
network users receive Framed access.
Number between 0 and
4,294,967,296 seconds
(approximately 136.2 years).
Name of the SSID you want the user to
use. The SSID must be configured in a
service profile, and the service profile
must be used by a radio profile
assigned to 3Com radios in the
Mobility Domain.
Date and time, in the following
format:
YY/MM/DD-HH:MM
You can use start-date alone or with
end-date. You also can use
start-date, end-date, or both in
conjunction with time-of-day.