Displaying The Running Configuration - 3Com 3CRWX120695A, 3CRWX440095A Configuration Manual

Managing Configuration Files 395
Displaying the To display the configuration running on the WX switch, use the following
Running command:
Configuration
display config [area area] [all]
The area area parameter limits the display to a specific configuration
area. (For more information, see the Wireless LAN Switch and Controller
Command Reference.)
The all parameter includes all commands that are set at their default
values. Without the all parameter, the display config command lists
only those configuration commands that set a parameter to a value other
than the default.
To display the running configuration, type the following command:
WX1200# display config
# Configuration nvgen'd at 2004-5-10 19:08:38
# Image 2.1.0
# Model WX1200
# Last change occurred at 2004-5-10 16:31:14
set trace authentication level 10
set ip dns server 10.10.10.69 PRIMARY
set ip dns server 10.20.10.69 SECONDARY
set ip route default 10.8.1.1 1
set log console disable severity debug
set log session disable severity alert
set log buffer enable severity error messages 200
set log trace disable severity error mbytes 10
set log server 192.168.253.11 severity critical
set timezone PST -8 0
set summertime PDT start first sun apr 2 0 end lastsun oct 2 0
set system name WX1200
set system countrycode US
set system contact 3Com-pubs
set radius server r1 address 192.168.253.1 key sunflower
set server group sg1 members r1
set enablepass password b6b706525e1814394621eeb2a1c4d5803fcf
set authentication console * none
set authentication admin * none
set user tech password encrypted 1315021018
press any key to continue, q to quit.
To display only the VLAN configuration commands, type the following
command:
WX1200# display config area vlan