3Com 3CRWX120695A, 3CRWX440095A Configuration Manual page 190

190 C 7: C
HAPTER ONFIGURING
U E
SER NCRYPTION
5 Create a service profile named wpa-wep-for-mac for SSID voice. Type the
following command:
WX1200# set service-profile wpa-wep-for-mac
success: change accepted.
6 Set the SSID in the service profile to voice. Type the following command:
WX1200# set service-profile wpa-wep-for-mac ssid-name voice
success: change accepted.
7 Enable WPA in service profile wpa-wep-for-mac. Type the following
command:
WX1200# set service-profile wpa-wep-for-mac wpa-ie enable
success: change accepted.
8 Enable the WEP40 cipher suite in service profile wpa-wep-for-mac. Type
the following command:
WX1200# set service-profile wpa-wep-for-mac
cipher-wep40 enable
success: change accepted.
TKIP is already enabled by default when WPA is enabled.
9 Enable PSK authentication in service profile wpa-wep-for-mac. Type the
following command:
WX1200# set service-profile wpa-wep-for-mac auth-psk enable
success: change accepted.
10 Configure a passphrase for the preshared key. Type the following
command:
WX1200# set service-profile wpa-wep-for-mac psk-phrase
"passphrase to convert into a preshared key"
success: change accepted.