Viewing The Test Sequence List; Viewing The Test Sequence List Using The Front Panel; Viewing The Test Sequence List Using The Command Line Interface - Quantum Data 881 User Manual

Viewing the test sequence list

Viewing the test sequence list using the front panel

Viewing the test sequence list using the command line interface

882 Video Test Instrument User Guide (Rev A.35)
You can view the list of test sequences stored in the generator using the generator front
panel controls or the command line interface.
Use the following procedure to view the test sequence list using the generator's front
panel.
To view the sequence list using the front panel:
1. Press the Tools key. The Tools menu appears as shown below:
System
Sequence
Probe
AFC
2. Choose the Sequence item by pressing the adjacent softsoft key.
A list of sequences appears as shown below. If necessary, press the - key to scroll
down the list.
NewSeq
Myseq_01
Myseq_03
Myseq_05
Use the following procedure to view the test sequence list using the command line
interface.
To view the sequence list using the command line interface:
1. Establish a session with the generator using either HyperTerminal over a serial
connection or Telnet over an Ethernet LAN. See
the 882" on page 30 or
2. Set the sequence path to the medium and location you want to query. For example, if
you want to view the sequence files in the generator's flash memory, enter the following
command:
SEQP /tffs0/Library/Sequence
To set the sequence path to view the sequence files on the PC card, enter the following
command:
Probe
Analog
Myseq_02
Myseq_04
Myseq_06
"Establishing a Telnet session with the
"Establishing a terminal session with
882" on page 33.
251