Quantum Data 881 User Manual page 879

XISH:PATH
Class
Description
Command syntax
Query syntax
Query response
Example 1
Example 2
Related commands
882 Video Test Instrument User Guide (Rev A.35)
Image SHift Path
ImageShift
Establishes two points along which the image will be shifted. The points are defined by two
sets of x,y coordinates. The default coordinates are 0,0 and 100,100. The x coordinates
must be less than or equal to the active horizontal resolution of the current video format,
which can be queried with HRES?. The y coordinates must be less than or equal to the
active vertical resolution of the current video format, which can be queried with VRES?. If
an imageshift editing session is in progress (the
be changed, but not applied to the hardware until the
issued. Otherwise, the command will take effect immediately.
XISH:PATH x_start,y_start x_end,y_end
x_start,y_start x_end,y_end
positive integer numbers
XISH:PATH?
x_start,y_start x_end,y_end
XISH:PATH 0,0 150,20
XISH:PATH? //Queries for current path.
0,0 150,20
ISHA, ISHB, ISHE, ISHG, ISHK, ISHL, ISHN, ISHP, ISHQ?, ISHS, ISHU, XISH:HINC,
XISH:SRCN, XISH:TINC, XISH:TTYP,
ISHB
//Sets the start point to 0,0 and the end point to
//150,20
XISH:VINC
command was issued), the path will
ISHE and ISHU commands are
851