Quantum Data 881 User Manual page 837

SMOD
Class
Description
Command syntax
Query syntax
Query response
Other required
commands
Example
882 Video Test Instrument User Guide (Rev A.35)
Sequence operating MODe
Sequence editor control
Sets the sequence mode. The SMOD? query returns the current setting of SMOD.
SMOD mode
mode
0 = disable
1 = enable manual step mode that stops at last step
2 = enable manual step mode that wraps to first step after last step
3 = enable continuous auto stepping
SMOD?
mode
The SEQL command loads the sequence and
SEQL MY_SEQ // Load "MY_SEQ" in edit buffer
SEQU // Start running the sequence in the buffer
SMOD 3 // Set the sequence mode
SEQU starts to run it.
809