Table of Contents
Advertisement
Setting the file server IP address in the 882
Chapter 4 Networking 882s
146
6. To save the changes, press the Enter (Options) key. The following choices appear on
the 882's display:
Apply Settings?
Yes
To save the changes, choose the Yes item by pressing the adjacent soft key.
To exit without saving the changes, choose the No item.
To return to the Network Connection screen without saving the changes, choose the
Back item.
7. Power cycle the 882 to set the IP address of the 882.
You must enter the IP address of the file server in each 882 so the 882 can communicate
with the file server. In addition, you can also enter a name (called the Host Name) for the
file server.
To specify the IP address and host name of the file server:
1. Press the Tools key. The Tools menu appears on the 882's display as shown below.
System
Sequence
Probe
AFC
2. Choose the System item by pressing the adjacent soft key. The System menu appears
on the 882's display as shown below.
*Clock
CalFactor
Network
Serial
3. Choose the Server item by pressing the adjacent soft key. The server name and IP
address appear on the 882's display.
Host IP Address
Host001
206.135.215.218
Back
No
Reports
ImgShift
Analyzer
CEC
Clone
Server
About
Gpib
Advertisement
Table of Contents
