Quantum Data 881 User Manual page 132

Chapter 3 Administrative Tasks
122
18. Repeat the procedure.
To boot a stalled generator from a different host:
1. Power down the generator, hold down the Tools key and then re-apply power to the
generator. The following screen appears on the generator's display:
!BootDev !Passwd
!HostName !Flags
!FileName !Other
!InetAddr !TrgtName
2. Choose the !BootDev item, and then choose the Network Boot item.
3. Press the Tools key and choose the !HostName item by pressing the adjacent soft
key. The following appears on the generator's display:
Boot Line
Setup Boot Host
Hostname
QDEW018
4. Change the host name as follows:
a. Position the blinking cursor on the character you want to change. To do this, press
the soft key adjacent to the arrow by the host name to move the cursor left or right
until it appears on the character you want to change.
b. Select the desired character by pressing the + or - keys to scroll through uppercase
letters, lowercase letters, and numbers. Repeat for each character you want to
change.
5. Press the Options (Enter) key to save the configuration.
6. Return to the Tools menu and choose the !HostAddr item by pressing the adjacent
soft key. The following appears on the generator's display:
Boot Line
Setup TCP_IP
Host IP Address
192.168.254.102
7. Change the host IP address as follows:
a. Position the blinking cursor on the digit of the IP address you want to change. To
do this, press the soft key adjacent to the arrow by the address to move the cursor
left or right until it appears on the digit you want to change.
b. Adjust the value of the digit up or down by pressing the + or - keys. Repeat for each
digit you want to change.
8. Press the Options (Enter) key to save the configuration.
9. Restart the generator by cycling the power.
->
->