SDGM
Class
Description
Command syntax
Example 1
Example 2
Example 3
882 Video Test Instrument User Guide (Rev A.35)
Sonic Data Gate for SPDIF output
Parameters (Audio Signal and Timing)
Configures what audio (from what source) is transmitted out the SPDIF audio output port.
Note: This command applies only to the 882EA.
SDGM mask
mask
0 = HDMI Rx - SPDIF OUT audio content is from the audio on the HDMI Rx port.
1 = SPDIF IN - SPDIF OUT audio content is from the audio received from the SPDIF
Input.
2 = Internal - SPDIF OUT audio content is from the internal SPDIF audio generator.
SDGM 2
// Causes the 882EA pass the SPDIF audio received from its SPDIF
IN connector out through the SPDIF OUT connector.
SDGM 1
// Causes the 882EA pass the SPDIF audio received from its HDMI
IN connector out through the SPDIF OUT connector.
SDGM 0
// Causes the 882EA pass the SPDIF audio received from its
internal SPDIF generator out through the SPDIF OUT connector.
793
Need help?
Do you have a question about the 881 and is the answer not in the manual?