BRAKE FLUID REPLACEMENT/ AIR
BLEEDING (CB600FA)
BRAKE FLUID DRAINING
I
NOTICE
$pilled fluid can damage painted, plastic or rubber
parts. Place a rag over these parts whenever the
system is serviced.
NOTE:
• Do not allow foreign material to enter the system
when filling the reservoir.
• When using a commercially available brake
bleeder, follow the manufacturer's operating
instructions.
Lever Brake Line:
Turn the handlebar to the left until the frQnt master
cylinder reservoir is level before removing the res
ervoir cap.
Remove the screws, reservoir cap, set plate and dia
phragm.
Connect a bleed hose to the left caliper bleed valve.
Loosen the bleed valve and pump the brake lever
until no more fluid flows out of the bleed valve.
Connect a bleed hose to the right caliper upper
bleed valve.
Loosen the upper bleed valve and pump the brake
lever until no more fluid flows out of the bleed
valve.
I
HYDRAULIC BRAKE
15-7