Options; Rack Mount With Slides; Status Outputs - Teledyne 401 Instruction Manual

Teledyne API Model 401 O

1.8 Options

1.8.1 Rack Mount With Slides

This option, including slides and rack mounting ears, permits the Analyzer to be mounted in a
standard 19" wide x 30" deep RETMA rack.

1.8.2 Status Outputs

The status output is an option that reports Analyzer conditions to a 50 pin connector from the
mother board. The contacts are NPN transistors which can pass 50 ma of direct current. See
Section 8.6 for status output pin assignments.
Photometric Calibrator Instruction Manual, 01124, Rev. J1
3
1-22