Table of Contents
Advertisement
HDO9000 High Definition Oscilloscopes Operator's Manual
Oscilloscope Set Up
Powering On/Off
Press the Power button to turn on the instrument. The X-Stream application loads automatically
when you use the Power button.
Caution: Do not change the instrument's Windows ® Power Options setting from the default
Never to System Standby or System Hibernate. Doing so can cause the system to fail.
Caution: Do not power on or calibrate with a signal attached.
Use the File > Shutdown menu bar option to switch "off". Pressing Power again will execute a
shutdown, but we do not recommend doing this because it does not allow the Windows operating
system to shut down properly, and memories and setup panels will not be saved. Never power off by
pulling the power cord from the socket or shutting off a connected power strip.
The Power button does not disconnect the instrument from the AC power supply. The only way to fully
power down the instrument is to unplug the AC power cord.
We recommend unplugging the instrument if it will remain unused for a long period of time.
Software Activation
The operating software (firmware and standard applications) is active upon delivery. At power-up, the
instrument loads the software automatically.
Firmware
Free firmware updates are available periodically from the Teledyne LeCroy website at:
teledynelecroy.com/support/softwaredownload
Registered users can receive an email notification when a new update is released. Follow the
instructions on the website to download and install the software.
Purchased Options
If you decide to purchase an option, you will receive a license key via email that activates the optional
features. See
Options
12
for instructions on activating optional software packages.
Advertisement
Table of Contents
