Problems With Express Setup - NEC BladeServer Express5800 Series User Manual

Problems with Express Setup

The system partition size issmaller than the specified value:
→ In Express Setup, there are some cases where the system partition size is c about 8MB
smaller than the specified size.
It is not a problem for normal system operation.
The following message appears when you try to specify a partition size larger than the
capacity of the hard disk drive:
The creating of the partition was failed.
The process can not be continued. The process was stopped.
→ Cannot continue setup.
Specify a partition size smaller than the capacity of the hard disk drive and retry
setup.
Specified to join the Domain, but the system is installed as Workgroup:
→ When the setup fails to join the domain during the installation, it will install the
system as Workgroup. Open [System] in Control Panel to join the domain.
Unable to configure the Network adapter:
→ In Express Setup, you cannot configure the Network adapter. Configure it in the
Control Panel after starting Windows.
O K
Troubleshooting 8-17