3.6 Digital Operator and Front Cover
Models CIMR-LU20085 to 20415, 40045 to 40605, and 50032 to 50200
1.
Remove the terminal cover and the digital operator.
2.
Loosen the installation screw on the front cover.
3.
Use a straight-edge screwdriver to loosen the hooks on each side of the cover that hold it in place.
Figure 3.12
Front cover
installation screw
(Models CIMR-LU20085 to 20415, 40045 to 40605, and 50032 to 50200)
4.
Unhook the left side of the front cover then swing the left side towards you as shown in
cover comes off.
Figure 3.13
(Models CIMR-LU20085 to 20415, 40045 to 40605, and 50032 to 50200)
66
Hook
Figure 3.13 Remove the Front Cover
Figure 3.14 Remove the Front Cover
Hook
Free hooks on both
sides of the cover
YASKAWA ELECTRIC SIEP C710616 38F YASKAWA AC Drive - L1000A Technical Manual
Figure 3.14
until the