Models CIMR-LU20085 to 20415, CIMR-LU40045 to 40370, 50003 to 50200, and 50032 to 50200
1.
Use a Phillips screwdriver to loosen the screw holding the CN19 connector cover in place.
Figure 4.29
2.
Slide the CN19 connector cover from the drive as shown in
Figure 4.30
3.
Insert a straight-edge screwdriver into the opening as shown in
cover by sliding it as shown in
Figure 4.31
YASKAWA ELECTRIC SIEP C710616 38F YASKAWA AC Drive - L1000A Technical Manual
Screw
Connector
cover
Phillips screwdriver
Figure 4.34 Removing the CN19 Connector Cover
Figure 4.35 Sliding the CN19 Connector Cover
Figure
4.36.
Figure 4.36 Removing the CN19 Connector Cover
4.6 Setup Procedure for Elevator Applications
Figure
4.35.
Figure
4.36, then remove the CN19 connector
4
147