5.4 d: Reference Settings
d1-19: Nominal Speed
■
Sets the nominal speed when a multi-function input terminal is programmed for "Nominal speed" (H1- = 50).
No.
d1-19
<1> Setting ranges and defaults vary by the setting units determined by parameter o1-03. Refer to
Selection (o1-03) on page 442
d1-20, d1-21, d1-22: Intermediate Speeds 1 to 3
■
Sets intermediate speeds 1 through 3.
No.
d1-20
d1-21
d1-22
<1> Setting ranges and defaults vary by the setting units determined by parameter o1-03. Refer to
Selection (o1-03) on page 442
d1-23: Releveling Speed
■
Sets the releveling speed when a multi-function input terminal is programmed for "Releveling speed" (H1- = 52).
No.
d1-23
<1> Setting ranges and defaults vary by the setting units determined by parameter o1-03. Refer to
Selection (o1-03) on page 442
d1-24: Inspection Operation Speed
■
Sets the inspection speed when a multi-function input terminal is programmed for "Inspection speed" (H1- = 54). A
description of the inspection speed can be found in
No.
d1-24
<1> Setting ranges and defaults vary by the setting units determined by parameter o1-03. Refer to
Selection (o1-03) on page 442
d1-25: Rescue Operation Speed
■
Determines the speed during Rescue Operation. Refer to
No.
d1-25
<1> Setting ranges and defaults vary by the setting units determined by parameter o1-03. Refer to
Selection (o1-03) on page 442
d1-26: Leveling Speed
■
Sets the inspection speed when a multi-function input terminal is programmed for "Leveling speed" (H1- = 53).
No.
d1-26
<1> Setting ranges and defaults vary by the setting units determined by parameter o1-03. Refer to
Selection (o1-03) on page 442
184
Parameter Name
Nominal Speed
for details.
Parameter Name
Intermediate Speed 1
Intermediate Speed 2
Intermediate Speed 3
for details.
Parameter Name
Releveling Speed
for details.
Inspection Operation on page
Parameter Name
Inspection Operation Speed
for details.
Parameter Name
Rescue Operation Speed
for details.
Parameter Name
Leveling Speed
for details.
YASKAWA ELECTRIC SIEP C710616 38F YASKAWA AC Drive - L1000A Technical Manual
Defaults and Setting Ranges by Display Unit
Defaults and Setting Ranges by Display Unit
Defaults and Setting Ranges by Display Unit
Defaults and Setting Ranges by Display Unit
Rescue Operation on page 134
Defaults and Setting Ranges by Display Unit
Defaults and Setting Ranges by Display Unit
Setting Range
0.00 to 100.00%
<1>
Setting Range
0.00 to 100.00%
<1>
0.00 to 100.00%
<1>
0.00 to 100.00%
<1>
Setting Range
0.00 to 100.00%
<1>
128.
Setting Range
0.00 to 100.00%
<1>
for details.
Setting Range
0.00 to 100.00%
<1>
Setting Range
0.00 to 100.00%
<1>
Default
100.00%
<1>
Default
0.00%
<1>
0.00%
<1>
0.00%
<1>
Default
0.00%
<1>
Default
50.00%
<1>
Default
10.00%
<1>
Default
8.00%
<1>