YASKAWA L1000A Technical Manual page 398

B.3 Parameter Table
C4: Torque Compensation
■
No.(Addr.) Name
C4-01
(215H)
Torque Compensation Gain
C4-02
(216H)
Torque Compensation Primary
Delay Time
C4-03 Torque Compensation at Forward
(217H) Start
C4-04 Torque Compensation at Reverse
(218H) Start
C4-05 Torque Compensation Time
(219H) Constant
<5> Default setting is determined by the control mode (A1-02).
C5: Speed Control Loop Settings
■
No.(Addr.) Name
C5-01
(21BH)
Speed Control Loop Proportional
Gain 1
C5-02
(21CH)
Speed Control Loop Integral Time
1
C5-03
(21DH)
Speed Control Loop Proportional
Gain 2
C5-04
(21EH) Speed Control Loop Integral Time
2
C5-06 Speed Control Loop Primary
(220H) Delay Time Constant
C5-07 Speed Control Settings Switching
(221H) Speed
C5-08
Speed Control Loop Integral Limit
(222H)
C5-13
(272H) Speed Control Loop Proportional
Gain 3
C5-14
(273H)
Speed Control Loop Integral Time
3
C5-16 Speed Control Loop Delay Time
(271H) during Position Lock
C5-17
Motor Inertia
(276H)
C5-18
Load Inertia Ratio
(277H)
C5-19
(274H) Speed Control Loop Proportional
Gain Time during Position Lock
398
V/f OLV
Sets the gain for the automatic torque (voltage) boost function and helps to produce better
starting torque.
V/f OLV
Sets the torque compensation filter time.
V/f OLV
Sets torque compensation at forward start as a percentage of motor torque.
V/f OLV
Sets torque compensation at reverse start as a percentage of motor torque.
V/f OLV
Sets the time constant for torque compensation at forward start and reverse start (C4-03 and
C4-04).
V/f OLV
Sets the proportional gain 1 of the speed control loop.
V/f OLV
Sets the integral time 1 of the speed control loop.
V/f OLV
Sets the proportional gain 2 of the speed control loop.
V/f OLV
Sets the integral time 2 of the speed control loop.
V/f OLV
Sets the filter time constant for the time from the speed loop to the torque command output.
V/f OLV
Sets the speed for switching between proportional gain 1, 2, 3 and integral time 1, 2, 3.
V/f OLV
Sets the speed control loop integral upper limit as a percentage of rated torque.
V/f OLV
Sets the proportional gain 3 of the speed control loop.
V/f OLV
Sets the integral time 3 of the speed control loop.
V/f OLV
Sets a delay to the torque command output from speed control loop during Position Lock.
V/f OLV
Sets the motor inertia.
V/f OLV
Sets the ratio between the motor and load inertia.
V/f OLV
Sets the Speed Control Loop Proportional gain used during Position Lock.
YASKAWA ELECTRIC SIEP C710616 38F YASKAWA AC Drive - L1000A Technical Manual
Description
CLV CLV/PM
CLV CLV/PM
CLV CLV/PM
CLV CLV/PM
CLV CLV/PM
Description
CLV CLV/PM
CLV CLV/PM
CLV CLV/PM
CLV CLV/PM
CLV CLV/PM
CLV CLV/PM
CLV CLV/PM
CLV CLV/PM
CLV CLV/PM
CLV CLV/PM
CLV CLV/PM
CLV CLV/PM
CLV CLV/PM
Setting
common_
Default: 1.00
TMonly
Min: 0.00
Max: 2.50
Default:
<5>
common_
TMonly Min: 0 ms
Max: 60000 ms
Default: 0.0%
common_
TMonly
Min: 0.0%
Max: 200.0%
Default: 0.0%
common_
TMonly
Min: -200.0%
Max: 0.0%
common_
Default: 10 ms
TMonly
Min: 0 ms
Max: 200 ms
Setting
Default:
<5>
common_
TMonly
Min: 0.00
Max: 300.00
Default:
common_ <5>
TMonly
Min: 0.000 s
Max: 10.000 s
Default:
<5>
common_
TMonly
Min: 0.00
Max: 300.00
Default: 0.500 s
common_
TMonly
Min: 0.000 s
Max: 10.000 s
Default: 0.004 s
common_
TMonly
Min: 0.000 s
Max: 0.500 s
Default:
<5>
common_
TMonly
Min: 0.0%
Max: 100.0%
Default: 400%
common_
TMonly
Min: 0%
Max: 400%
Default:
<5>
common_
TMonly
Min: 0.00
Max: 300.00
Default:
<5>
common_
TMonly
Min: 0.000 s
Max: 10.000 s
Default: 0.000 s
common_
TMonly
Min: 0.000 s
Max: 0.500 s
Default:
<4>
common_
TMonly
Min: 0.0001 kgm 2
Max: 600.00 kgm 2
Default: 1.0
common_
TMonly
Min: 0.0
Max: 6000.0
Default:
<5>
common_
TMonly
Min: 0.00
Max: 300.00
Page
177
178
178
178
178
Page
180
180
180
180
180
180
181
180
180
181
181
181
181