YASKAWA L1000A Technical Manual page 146

4.6 Setup Procedure for Elevator Applications
3.
Use a pair of diagonal cutters to cut an opening in the connector cover that allows the cable to pass through. The
cable should pass through the connector cover with the cover fastened to the drive.
Figure 4.26
4.
Slide the connector cover back into place as shown in
NOTICE: Make sure the cable does not get pinched between the drive and the connector cover, as this could damage the cable.
Figure 4.27
Figure 4.28
146
Cut an opening to allow the
battery cable to pass through.
Figure 4.31 Reattaching the Connector Cover (1)
Figure 4.32 Reattaching the Connector Cover (2)
Connect
to battery.
Figure 4.33 Drive and Battery Connection Complete
YASKAWA ELECTRIC SIEP C710616 38F YASKAWA AC Drive - L1000A Technical Manual
Figure 4.32.