7F-10 DIFFERENTIAL (REAR)
Differential carrier
For press-fitting drive bevel pinion bearing outer races, use spe-
cial tools as shown in the figure.
Special tool
(A) : 09924-74510
(B) : 09926-68310
(C) : 09913-75510
1. Differential carrier
Differential case
1) After applying differential oil to differential gear (4), pinions
2) When installing pinion shaft No.2 (2) (shorter) into differential
1
NOTE:
a
"a" is longer than "b". ("a" > "b")
b
2
3) Check differential pinion gear (1) for smooth rotation.
1
(5), pinion shafts (6), thrust washer (2) and spring washer
(1), install them in differential right case (3).
For correct installing direction of thrust washer (2) and spring
washer (1), refer to the figure.
case and pinion, insert its "a" side into pinion joint (1).