Part Inspection And Correction Table - Suzuki Wagon R Plus RB310 Service Manual

Part Inspection and Correction Table

Part
Casted part, machined part
Bearing
Bushing, thrust washer
Oil seal, gasket
Gear
Splined part
Snap ring
Thread
Spring
Friction plate
Separator plate, retaining plate Wear, burning, distortion, damaged claw
Sealing surface (where lip con-
tacts)
Inspect for
Small flaw, burr
Deep or grooved flaw
Clogged fluid passage
Flaw on installing surface, residual gasket Remove with oil stone or replace
Crack
Unsmooth rotation
Streak, pitting, flaw, crack
Flaw, burr, wear, burning
Flawed or hardened seal ring
Worn seal ring on its periphery or side
Piston seal ring, oil seal, gasket, etc.
Flaw, burr
Worn gear tooth
Burr, flaw, torsion
Wear, flaw, distortion
No interference
Burr
Damage
Settling, sign of burning
Wear, burning, distortion, damaged claw
Flaw, rough surface, stepped wear, foreign
material
AUTOMATIC TRANSAXLE (M13 ENGINE) 7B1-119
Correction
Remove with oil stone.
Replace part.
Clean with air or wire.
part.
Replace part.
Replace.
Replace.
Replace.
Replace.
Replace.
Replace.
Replace.
Replace.
Correct with oil stone or replace.
Replace.
Replace.
Replace.
Replace.
Replace.
Replace.
Replace.
Replace.