Xerox DocuColor 2240 Service Manual page 1124

Chain-Link Name
744-239 Applied Time for 104mm/sec. OHP Skip
DC3535 only modeTarget Run Temp.(T[Run#4])
744-239 Applied Time for 104mm/sec. OHP Skip
DC3535 only modeTarget Run Temp.(T[Run#5])
744-248 Condensation Guard Mode
744-249 STS-1 Ready temperature #2
DC3535 only
744-250 STS-2 Ready temperature #2
DC3535 only
744-251 STS-1 Ready temperature #3
DC3535 only
744-252 STS-2 Ready temperature #3
DC3535 only
744-253 Change Ready temperature
DC3535 only
Initial issue
DC 3535/2240/1632, WC M24
Table 1 Chain 744
Default Range Description
6 1~100 (1 bit=5 sec.)
16 1~100 (1 bit=5 sec.)
0 0~10 Wait time from Fuser ready (1 count=1 min.)
145 100~150 STS-1 Ready temperature for STS-1, 2 - temperature value of 744-253 or lower at recovery from Low-Power/
Sleep mode (1 bit=1 deg.C)
145 100~150 STS-2 Ready temperature for STS-1, 2 - temperature value of 744-253 or lower at recovery from Low-Power/
Sleep mode (1 bit=1 deg.C)
145 100~150 STS-1 Ready temperature for STS-1, 2 - temperature value of 744-253 or higher at recovery from Low-Power/
Sleep mode (1 bit=1 deg.C)
145 100~150 STS-2 Ready temperature for STS-1, 2 - temperature value of 744-253 or higher at recovery from Low-Power/
Sleep mode (1 bit=1 deg.C)
45 20~100 Threshold for changing Ready temperature at recovery from Low-Power/Sleep mode
09/03
6-33
General Procedures and Information
744--xxx Fuser NVM List