Xerox DocuColor 2240 Service Manual page 1148

Chain-Link Name
760-026 K-YSO
760-027 Regi Con/Circum. Length Correction
implement SW
760-028 RC Start Temp
760-029 OLRC implementation SW
760-030 Y-OLRC Start Temp
760-031 M-OLRC Start Temp
760-032 K-OLRC Start Temp
760-033 Lchev
DC3535
760-034 Pchev
DC5353
760-035 Aok (for Diag Regi Con)
760-036 Aok (for normal Regi Con)
760-037 LEDset-IN-A
760-038 LEDset-IN-B
760-039 LED-IN-A-Low
DC5353
760-040 LED-IN-A-High
DC5353
760-041 LED-IN-B-Low
DC5353
760-042 LED-IN-B-High
DC5353
760-043 LEDset-OUT-A
760-044 LEDset-OUT-B
760-045 LED-OUT-A-Low
DC5353
760-046 LED-OUT-A-High
DC5353
760-047 LED-OUT-B-Low
DC5353
760-048 LED-OUT-B-High
DC5353
760-049 Y-XBI
Initial issue
DC 3535/2240/1632, WC M24
Table 1 Chain 760
Default Range Description
237 0~474 Adjusts the slow scan direction write start position by the #. of LS signal counts from the ROS/Image/Patch Start
signal. (1 pixel/bit)
3 0~3 For check during servicing etc. 0=Does not perform Regi Control nor Circumference Length Correction 1=Per-
forms Regi Control, does not perform Circumference Length Correction 2=Does not perform Regi Control, per-
forms Circumference Length Correction 3=Performs Regi Control and Circumference Length Correction
40 10~250 Threshold of (Normal) Regi Control Implementation Temperature difference. Value is 10 times the temperature.
(0.1 degree Celsius interval)
1 0~1 0=Does not perform Open Loop Regi control; 1=Performs Open Loop Regi control
30 10~100 Threshold of Yellow Open Loop Regi control implementation temperature difference. Value is 10 times the tem-
perature. (0.1 degree Celsius interval)
30 10~100 Threshold of Magenta Open Loop Regi control implementation temperature difference. Value is 10 times the
temperature. (0.1 degree Celsius interval)
30 10~100 Threshold of Black Open Loop Regi Control Implementation Temperature difference. Value is 10 times the tem-
perature. (0.1 degree Celsius interval)
100 0~255 Tolerance of color misregistration in lateral direction (2µm/bit)
100 0~255 Tolerance of color misregistration in lateral direction (2µm/bit)
20 1~24 Threshold of No. of valid Blocks of fine adjustment pattern at Diag Regi Control (DC685). NG occurs if the value
is out corrected below the threshold.
8 1~12 Threshold of No. of valid Blocks of fine adjustment pattern at Normal Regi Control. NG occurs if the value is out
corrected below the threshold.
2 0~2 MOB LED On/Off and light quantity step at IN side. 0=Off; 1=Low; 2=High
2 0~2 MOB LED On/Off and light quantity step at IN side.0=Off; 1=Low 2;=High
12 0~60 Set current value when light quantity on the LED-A side of IN-MOB is Low
25 0~60 Set current value when light quantity on the LED-A side of IN-MOB is High
12 0~60 Set current value when light quantity on the LED-b side of IN-MOB is Low
25 0~60 Set current value when light quantity on the LED-B side of IN-MOB is High
2 0~2 MOB LED On/Off and light quantity step at OUT side. 0=Off; 1=Low; 2=High
2 0~2 MOB LED On/Off and light quantity step at OUT side 0=Off; 1=Low; 2=High
12 0~60 Set current value when light quantity on the LED-A side of OUT-MOB is Low
25 0~60 Set current value when light quantity on the LED-A side of OUT-MOB is High
12 0~60 Set current value when light quantity on the LED-b side of OUT-MOB is Low
25 0~60 Set current value when light quantity on the LED-B side of OUT-MOB is High
0 0~3 Adjusts fast scan direction write start position by switching the video clock phase from SOS signal.
(DC 2240/1632=1 pixel/bit; DC 3535=1/5 pixel/bit)
09/03
6-57
General Procedures and Information
760-xxx Regicon NVM List