Chain-Link
Name
760-060
K-OLXBI
760-061
Y-OLYSO
760-062
M-OLYSO
760-063
C-OLYSO
760-064
K-OLYSO
760-065
Y-OLMAG
760-066
M-OLMAG
760-067
C-OLMAG
760-068
K-OLMAG
Initial issue
DC 3535/2240/1632, WC M24
Table 1 Chain 760
Default
Range
Description
0
0~3
Adjust writing-start position in FS direction in Open Loop, by switching video lock phase from SOS signal, based
on temperature detection results, separately from normal Regi Con cycle
(DC 2240/1632=1 pixel/bit; DC 3535=1/5 pixel/bit).
This NVM is defined with the correction amount from the current set values XBI-, XSO-; its level is 5 steps from
-1 to -5 depending on the temperature. XBI- and XSO- are overwritten based on the selected correction
amount.
4
0~20
Adjust using Open Loop the writing-start position in SS direction with the number of LS signal counts from ROS
Image Patch Start signal, based on temperature detection results, separately from normal Regi Con cycle
(1 pixel/bit).
This NVM is defined with the correction amount from the current set value YSO-; its level is 4 steps from -1 to -
4 depending on the temperature. YSO- is overwritten based on the selected correction amount.
10
0~20
Adjust using Open Loop the writing-start position in SS direction with the number of LS signal counts from ROS
Image Patch Start signal, based on temperature detection results, separately from normal Regi Con cycle
(1 pixel/bit).
This NVM is defined with the correction amount from the current set value YSO-; its level is 4 steps from -1 to -
4 depending on the temperature. YSO- is overwritten based on the selected correction amount.
10
0~20
Adjust using Open Loop the writing-start position in SS direction with the number of LS signal counts from ROS
Image Patch Start signal, based on temperature detection results, separately from normal Regi Con cycle
(1 pixel/bit).
This NVM is defined with the correction amount from the current set value YSO-; its level is 4 steps from -1 to -
4 depending on the temperature. YSO- is overwritten based on the selected correction amount.
10
0~20
Adjust using Open Loop the writing-start position in SS direction with the number of LS signal counts from ROS
Image Patch Start signal, based on temperature detection results, separately from normal Regi Con cycle
(1 pixel/bit).
This NVM is defined with the correction amount from the current set value YSO-; its level is 4 steps from -1 to -
4 depending on the temperature. YSO- is overwritten based on the selected correction amount.
100
0~200
In Open Loop, adjust all magnification in FS direction by switching the average frequency of video clock of each
ROS, based on temperature detection results, separately from normal Regi Con cycle (DC 2240/1632=1/4
pixel/bit; DC 3535=1/10 pixel/bit).
This NVM is defined with the correction amount from the current set value MAG-; its level is 4 steps from -1 to -
4 depending on temperature. The above MAG- is overwritten based on the selected correction amount
100
0~200
In Open Loop, adjust all magnification in FS direction by switching the average frequency of video clock of each
ROS, based on temperature detection results, separately from normal Regi Con cycle (DC 2240/1632=1/4
pixel/bit; DC 3535=1/10 pixel/bit).
This NVM is defined with the correction amount from the current set value MAG-; its level is 4 steps from -1 to -
4 depending on temperature. The above MAG- is overwritten based on the selected correction amount
100
0~200
In Open Loop, adjust all magnification in FS direction by switching the average frequency of video clock of each
ROS, based on temperature detection results, separately from normal Regi Con cycle (DC 2240/1632=1/4
pixel/bit; DC 3535=1/10 pixel/bit).
This NVM is defined with the correction amount from the current set value MAG-; its level is 4 steps from -1 to -
4 depending on temperature. The above MAG- is overwritten based on the selected correction amount
100
0~200
In Open Loop, adjust all magnification in FS direction by switching the average frequency of video clock of each
ROS, based on temperature detection results, separately from normal Regi Con cycle (DC 2240/1632=1/4
pixel/bit; DC 3535=1/10 pixel/bit).
This NVM is defined with the correction amount from the current set value MAG-; its level is 4 steps from -1 to -
4 depending on temperature. The above MAG- is overwritten based on the selected correction amount
09/03
6-59
General Procedures and Information
760-xxx Regicon NVM List