Table of Contents
Advertisement
Using the
Menu
Interface
2000-A2-GB20-10
4.Type your password and press Enter to display the Main menu.
*****************************************
Main Menu
*****************************************
1. Reports Menu
2. Configure IP Router
3. Configure Bridge
5. Configure WAN
6. Configure LAN
7. Configure SNMP
8. Configure Login
9. System Utilities
D. Configure DHCP Server
N. Configure NAT
T. Telephony Clock Recovery
Z. Diagnostics Menu
C. Command Line Interface
R. Reset System
P. Voice Path Configure
NOTE
The user ID and password transmit as clear text, which may
be captured by unauthorized individuals. If you are concerned
with network security, you may not want to use Telnet to
configure the IAD.
The JetFusion IAD provides an ANSI-terminal-based menu interface for
system configuration and monitoring. When you log in, the IAD displays
the Main menu.
The commands displayed in some menus (including the Main menu) differ,
depending on the level at which you log in.
the Main menu when you log in at the Supervisor security level.
5
on page
17
displays the Main menu when you log in as Network
Administrator, and
Figure 2–6
you log in as User.
- 16 -
Figure 2–4
on page
17
displays the Main menu when
on page
17
displays
Figure 2–
February 2004
Advertisement
Table of Contents
