Paradyne JetFusion Integrated Access Device User Manual page 227

Integrated access device
Table of Contents

Advertisement

2000-A2-GB20-10
Table 12–19.Serial Statistics Report
Parameter
bytes sent
packets sent
discarded, TX ring full
discarded, bad pkt or link
not ready
discarded, TX error
Tx Clk glitch
Tx underrun
CTS lost
ATM Statistics Report
This report displays basic ATM transport statistics at the cell level for all
ports and PVCs.
Table 12–20.ATM Statistics Report
Field
The link has been up for X
hours X minutes X
seconds
Cells Rx
CLPI Rx
OAM Rx
EFCI Rx
RM Rx
Rx Cells Discarded
Cells Tx
OAM Tx
CLPI Tx
- 208 -
Description
No. of Data sent in bytes.
No. of packets sent.
No. of packets discarded because Transmitted Ring
Pool is full.
Discarded received packets due to:
- The status of the interface is not Online
- Transmitted packet length is larger than interface.
No. of outgoing packet being discarded due to
Clock glitch, and other transmission errors.
Total frames discarded on this port due to
transmitter clock glitch errors.
No. of times that there are no packets waiting in the
Transmitted Ring Buffer.
Total frames discarded on this port due to
transmitter CTS lost errors.
Description
Total time for the current time has been established.
No. of valid ATM cells received.
No. of cells received with CLPI (Cell Loss Priority
Indication) bit is on.
No. of OAM (Operation And Maintenance) cells
received.
No. of cells received with EFCI (Explicit Forward
Congestion Indication) bit is on.
No. of RM (Resource Management) cells received.
No. of received packets discarded due to:
- Unknown VPI/VCI numbers
- Bad Cell headers
- Size of cells received is larger than PDU size
- other reasons as required.
No. of valid ATM cell sent.
No. of cells transmitted with CLPI (Cell Loss Priority
Indication) bit is on.
No. of OAM (Operation And Maintenance) cells
transmitted.
February 2004

Advertisement

Table of Contents
loading

This manual is also suitable for:

2000Jetfusion

Table of Contents