Table of Contents
Advertisement
Displaying
DHCP
Entry
Details
Deleting a
DHCP Cli-
ent Entry
Deleting a
DHCP
Assign-
ment Entry
2000-A2-GB20-10
Type D to display DHCP entry details. The IAD displays the following
information about the DHCP entries:
Table 9–4. DHCP Entry Details
Value
Description
IP address
IP address of the device.
Client ID
Ethernet MAC address for the device.
Status
how the IP address is assigned to the device—via DHCP
server, or manually.
Subnet
IP subnet mask; number of bits reserved for host ID.
Gateway
IP address of packets sent to destination.
DNS
P address of the DNS server.
Lease
length of time to keep the Internet connection active.
Type
type of IP address: static or dynamic.
Name
name of the device.
For the IAD to display this information, you must attach DHCP Client
devices that use DHCP to obtain an IP address from the IAD.
Type X to delete a DHCP client entry.
1. The IAD displays a prompt:
Enter Client entry number to delete (1...10) >
Type the number of the client entry to delete and press Enter.
2. The IAD deletes the client entry from the table and saves the new
configuration.
3. Reset the IAD (page 14) for changes to take effect.
Type Y to delete a DHCP Assignment Entry.
1. The IAD prompts you for the DHCP entry index number to delete:
Enter DHCP entry index number (1 - 4) >
Type the index number to delete and press Enter.
2. The IAD deletes the assigned IP address from the Display DHCP
Server Assigned Addresses command and saves the new
configuration.
3. Reset the IAD (page 14) for changes to take effect.
- 162 -
February 2004
Advertisement
Table of Contents
