Paradyne JetFusion Integrated Access Device User Manual page 225

2000-A2-GB20-10
Frame Relay Statistics Report
Type F to display the Frame Relay Statistics report. This report displays
basic about Frame Relay operations on the WAN link (for all ports and
DLCIs).
Table 12–18.Frame Relay Statistics Report
Parameter
Received Data
Rx Frames
Rx Bytes
Rx Frames discarded
DE set on Rx
FECN set on Rx
BECN set on Rx
Rx congestion counter
CLLM frames Rx
LMI frames Rx
ANSI frames Rx
Transmitted Data
Tx Frames
Tx Bytes
Tx Frames discarded
DE set on Tx
FECN set on Tx
BECN set on Tx
- 206 -
Description
No. of frames received
No. of total bytes received
No. of Frame Relay received packets discarded
due to:
- Received Frames are larger than size of PDU
- Received Frames Headers are smaller than the
standard HDLC header size.
- Validity of address bits settings in the HDLC
header is incorrect.
- Value of Checksum Field in header is incorrect.
- The received DLCI number does not match the
DLCI connections on the IAD.
Indicates Discard Eligibility is allowed on incoming
frames, based on congestion, to maintain
committed information rate.
Forward Explicit Congestion Notification status set
to notify DTE that congestion avoidance should be
initiated by IAD.
Backward Explicit Congestion Notification status
set to notify DTE that congestion avoidance should
be initiated by the sending device.
No. of frames dropped due to congestion to
maintain committed information rate.
No. of CLLM (Consolidated Link Layer
Management) frames received
No. of LMI (Local Management Interface) frames
received
No. of ANSI frames received
No. of frames transmitted
No. of total bytes transmitted
No. of Frame Relay packets discarded due to:
- Transmitted frames are larger than PDU size.
- Packets overflow.
Indicates Discard Eligibility is allowed on
transmitted frames, based on congestion, to
maintain committed information rate.
Forward Explicit Congestion Notification status set
to notify DTE that congestion avoidance should be
initiated by IAD.
Backward Explicit Congestion Notification status
set to notify DTE that congestion avoidance should
be initiated by the sending device.
February 2004