Table of Contents
Advertisement
2000-A2-GB20-10
6. The IAD displays the bracketing prompt:
Enter option for using hostname with "[]" for
Signaling:
Type Y to wrap the port in brackets for call agent API compatibility, or N
and press Enter.
7. The IAD prompts for the outbound signaling packets TOS field value:
Enter the TOS byte value to use for Signalling
packets [1-7]:
Type the field value and press Enter.
8. The IAD prompts for the RTP transport packets TOS field value:
Enter the TOS byte value to use for RTP (Voice)
packets [1-7]:
Type the field value and press Enter.
9. The IAD saves the settings and displays the menu so you may
continue configuring MGCP/NCS.
10. Reset the IAD (page 14) when you finish voice path configuration.
Displaying MGCP Statistics
Type S to display the endpoint (line) and connection statistics. If no calls
are active, the IAD indicates if the Endpoint is currently connected to its
Notified Entity or not.
If MGCP configuration is not correct, the IAD displays this warning
message:
Configuration Invalid, initialization incomplete.
Debugging MGCP
The commands displayed on the Debug MGCP menu are reserved for
Paradyne network engineers.
Removing a Connection
Type R to remove a lost connection.
Type the number of the Connection ID to delete and press Enter.
Port Administration
Type A to display the Port Administration menu:
Figure 7–13. Port Administration Menu
*******************************************
Port Administration Menu
*******************************************
1. Set Admin State for all ports
2. Display current Admin State
3. Configure Admin State per portS
4. Restart Endpoint
NOTE
These options are only available when you log in at the
Network Administrator or Supervisor levels.
- 140 -
February 2004
Advertisement
Table of Contents
