Route Table Report; Arp Table Report; Bridge Forwarding Database Report - Paradyne JetFusion Integrated Access Device User Manual

Route Table
Report
ARP Table
Report
Bridge For-
warding
Database
Report
2000-A2-GB20-10
Type R to display the Route Table report in the Reports menu. The IAD
lists each route by IP address, and displays the following information about
statically configured routes and dynamically learned ones.
Table 12–26.Route Table Report
Parameter
Network Address
Netmask
Gateway Address
Interface
Metric
Type
Address Resolution Protocol (ARP) obtains the Ethernet MAC address for
a known IP address.
Type A on the Reports menu to display the following information about
mappings between Ethernet Media Access Control (MAC) addresses
(hardware addresses) and IP addresses.
Table 12–27.ARP Table Report
Parameter
IP Address
Ethernet Address
Interface
To display information about mappings between Ethernet addresses and
devices connected to the LAN, type B on the Reports Menu. The IAD
displays the following information:
Table 12–28.Bridge Forwarding Database Report
Parameter
Ethernet Address
Interface
- 217 -
Description
destination address
IP subnet mask; no. of bits reserved for the host
ID
IP address of packets sent to destination
IP address of outgoing interface
no. of hops (routers) required to reach the
specified gateway
static | dynamic | RIP | local
Description
IP address that corresponds to the MAC
address
Ethernet address of the device; assigned by the
manufacturer
The interface for the Ethernet address
Description
Ethernet address of the device; assigned by the
manufacturer
Interface for the Ethernet address
February 2004